SATA®filter 584®| 3-stage filter w/stand - SAT1101625

  • Sale
  • Regular price $2,930.00


SATA®filter 584®| 3-stage filter w/stand - SAT1101625

The SATA filter 584 w/stand boasts a higher absorption of contaminations (compared to SATA filter 484) due to the new sintered activated charcoal filter.

  • Air flow with 4 connections approx. 3,800 Nl/min (135 cfm)
  • SATA filter timer to monitor the exchange intervals of all filter cartridges
  • Synchronized maintenance: Filter maintenance only necessary every 6 months for all stages
  • Maintenance-free bayonet lock with haptic and acoustic feedback
  • Fine filter and activated charcoal filter cartridges fit perfectly by being simply inserted – without screw fittings or additional seals
  • CCS color coding of filter housing and filter cartridges for safe maintenance.
  • Upgrade of a SATA filter 544 to a 584 possible through a simple connector system
  • Maintenance-free sealing elements
  • Line connection optionally left or right
  • Flow-optimized cyclone separator with enhanced particle separation efficiency (approx. 10%) of particles > 5 µm (microns)

99.998 % technically particle-free air

Filter fineness:

  • Sintered filter: 5 µm (microns)
  • Fine filter: 0.01 µm (microns)
  • 100 % technically particle-free air
  • Activated charcoal filter: oil vapors
  • Air flow at 6 bar (87psi): 3,800 Nl/min (135cfm)

Ambient temperature:

  • 120 °C (240 ° F); with activated charcoal filter up to 60 °C (140 ° F)

Connection:

  • Air inlet: G 1/2" female thread
  • Air outlet: 1/4" male thread

Recommended for:

  • solvent-based paints
  • waterborne paints
  • breathing protection equipment

Product Benefits:

  • Higher absorption of contaminations (compared to SATA filter 484) due to the new sintered activated charcoal filter
  • Synchronized maintenance: Filter maintenance only necessary every 6 months for all stages
  • Maintenance-free bayonet lock with haptic and acoustic feedback
  • Fine filter and activated charcoal filter cartridges fit perfectly by being simply inserted – without screw fittings or additional seals
  • Upgrade of a SATA filter 544 to a 584 possible through a simple connector system
  • Maintenance-free sealing elements, no o-ring replacement during maintenance
  • Filter package is completely reversible to accommodate different filtration unit locations in booth
  • Line connection optionally left or right
  • Air regulator placed on air exit side resulting in better air flow and less loss of air efficiency
  • Air flow at 6 bar (87psi): 3,800 Nl/min (135 cfm)
  • Improved cfm output results in the capability of providing clean air to 4 painters, supplying spray guns and SATA Air Vision 5000 fresh air systems without loss or reduction of compressed air
  • Improved water cyclone device resulting in a more consistent air flow
  • Standard auto drain feature on models with sintered filter
  • Color coded canisters to match filter colors (yellow; sintered filter, blue; fine filter, black; activated charcoal filter)
  • Improved charcoal filter – new and improved sintered charcoal filter which does not break down as quickly as previous charcoal filter, with an improved replacement schedule of 6 months as opposed to 3 months on the previous model
  • Improvements on filter canister connections providing easier filter replacement
  • 99.998 % technically particle-free air
  • Accessory port for CO2 monitor
  • SATA adam 2 digital pressure gauge capability