Panther Euro-Liner 18' European Design Frame Machine

  • Sale
  • Regular price $35,000.00


Panther Euro-Liner 18' European Design Frame Machine

The Euro-Liner Automotive Chassis Correction Machine by Panther Frame Machines, is the ultimate frame machine, designed specifically for all size collision facilities and body shops. The Euro-Liner is designed for unibody and full frame vehicles alike, providing even the most advanced collision shops with efficient and versatile chassis repairs. Whether heavy chassis pulls are needed with the 10 ton pulling towers, or simple body pulls, the Euro-Liner frame machine gives you the flexibility for success. 

Specifications:
• Minimum Height: 15 inches
• Maximum Height: 48 inches
• Overall maximum height with towers attached: 108 inches (9 ft.)
• Tower Height: 60 inches
• Tower Length: 52 inches (4.3 ft.)
• Tower Height with Extension: 90 inches
• Rack Length: (w/o tower & ramps): 18 ft.
• Rack Length (w/tower & ramps): 24.4 ft.
• Rack Width (w/o ramps): 46 inches
• Rack Width (w/ramps): 82 inches
• Ramp Width: 17.75 inches
• Weight of Rack: 3000lbs.
• Maximum Lift Capacity: 10,500 lbs.
• Power required: 110v single phase 25-30 amp dedicated service
• Minimum Compressed Air: 110 psi
• Maximum Compressed Air: 145 psi
• Hydraulics for Lift: TITANIUM Electric Hydraulic System
• Hydraulics for Towers: SPX Power Team 10 ton foot pump
• Hydraulics for Towers: TITANIUM 10 ton 10 inch stroke ram
• Tower Pulling Force: 10 Ton
• 360 Degree Pulling Capacity: Yes
• Above Ground or In Ground Installation: Yes

Package includes:
• TITANIUM Euro-Liner 18 ft. Bench Rack
• TITANIUM electric hydraulic system, control cabinet including hand pendant (for raise & lower)
• (2) SPX Power Team 10 Ton foot pumps
• (2) Ten ton towers loaded with TITANIUM 10 ton 10 inch rams
• (2) Grade 100 high alloy pull chains w/forged slip hooks & chrome molybdenum chain links
• (10) Floor anchor bolts
• (5) Down pull assemblies
• (2) Lightweight removable zinc coated drive on ramps
• (4) Heavy duty forged pinch weld clamp assemblies
• (4) Truck anchor clamps
• (2) Pillar jacks w/mounting adapters
• (21) Piece heavy duty tool cart with tools
Features:
• Measuring system capable: Yes
• Machine milled surface
• Tilt angle loading and unloading
• Hydraulic jack hose no. 4: 700 bar (10,152.6 psi) x 2 safety factor
• Hydraulic oil type: AW32 only (use of other oils void warranty)
• *Clamp warranty: 12 months (excludes bolts)
• *Rack warranty: 12 months platform & hydraulics (excludes wearable nuts & bolts)
Optional:
• BMW & Mercedes Benz adapter clamps