SATA®filter 584®| 3-stage filter w/stand - SAT1101625
The SATA filter 584 w/stand boasts a higher absorption of contaminations (compared to SATA filter 484) due to the new sintered activated charcoal filter.
- Air flow with 4 connections approx. 3,800 Nl/min (135 cfm)
- SATA filter timer to monitor the exchange intervals of all filter cartridges
- Synchronized maintenance: Filter maintenance only necessary every 6 months for all stages
- Maintenance-free bayonet lock with haptic and acoustic feedback
- Fine filter and activated charcoal filter cartridges fit perfectly by being simply inserted – without screw fittings or additional seals
- CCS color coding of filter housing and filter cartridges for safe maintenance.
- Upgrade of a SATA filter 544 to a 584 possible through a simple connector system
- Maintenance-free sealing elements
- Line connection optionally left or right
- Flow-optimized cyclone separator with enhanced particle separation efficiency (approx. 10%) of particles > 5 µm (microns)
99.998 % technically particle-free air
Filter fineness:
- Sintered filter: 5 µm (microns)
- Fine filter: 0.01 µm (microns)
- 100 % technically particle-free air
- Activated charcoal filter: oil vapors
- Air flow at 6 bar (87psi): 3,800 Nl/min (135cfm)
Ambient temperature:
- 120 °C (240 ° F); with activated charcoal filter up to 60 °C (140 ° F)
Connection:
- Air inlet: G 1/2" female thread
- Air outlet: 1/4" male thread
Recommended for:
- solvent-based paints
- waterborne paints
- breathing protection equipment
Product Benefits:
- Higher absorption of contaminations (compared to SATA filter 484) due to the new sintered activated charcoal filter
- Synchronized maintenance: Filter maintenance only necessary every 6 months for all stages
- Maintenance-free bayonet lock with haptic and acoustic feedback
- Fine filter and activated charcoal filter cartridges fit perfectly by being simply inserted – without screw fittings or additional seals
- Upgrade of a SATA filter 544 to a 584 possible through a simple connector system
- Maintenance-free sealing elements, no o-ring replacement during maintenance
- Filter package is completely reversible to accommodate different filtration unit locations in booth
- Line connection optionally left or right
- Air regulator placed on air exit side resulting in better air flow and less loss of air efficiency
- Air flow at 6 bar (87psi): 3,800 Nl/min (135 cfm)
- Improved cfm output results in the capability of providing clean air to 4 painters, supplying spray guns and SATA Air Vision 5000 fresh air systems without loss or reduction of compressed air
- Improved water cyclone device resulting in a more consistent air flow
- Standard auto drain feature on models with sintered filter
- Color coded canisters to match filter colors (yellow; sintered filter, blue; fine filter, black; activated charcoal filter)
- Improved charcoal filter – new and improved sintered charcoal filter which does not break down as quickly as previous charcoal filter, with an improved replacement schedule of 6 months as opposed to 3 months on the previous model
- Improvements on filter canister connections providing easier filter replacement
- 99.998 % technically particle-free air
- Accessory port for CO2 monitor
- SATA adam 2 digital pressure gauge capability